{"id":52,"date":"2021-11-04T00:03:13","date_gmt":"2021-11-04T00:03:13","guid":{"rendered":"https:\/\/simplar.atakansaracoglu.com\/?page_id=52"},"modified":"2023-01-31T18:35:49","modified_gmt":"2023-01-31T17:35:49","slug":"our-services","status":"publish","type":"page","link":"https:\/\/valcverk.cz\/en\/our-services\/","title":{"rendered":"Services"},"content":{"rendered":"\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\n\t\t
\n\n\t\t\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t

\n\t\t\t\t\t\t\t\t\n\t\t\t\tServices \n\t\t\t<\/h1 > \n\t\t\t\t\t\t\t\t\t<\/a>\n\t\t\t\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t
    \n\t\t\t
  • \n \n\t\t\t\t\t\t
    \n\t\t\t\t\t\t\t
    \n\n\t\t\t\t\t\t\t\t\n\n\t\t\t\t\t\t\t\t<\/path>\t\t\t<\/rect>\t\t\t<\/path>\t\t\t<\/rect>\t\t<\/g>\t<\/g><\/g><\/g><\/g><\/g><\/g><\/g><\/g><\/g><\/g><\/g><\/g><\/g><\/g><\/g><\/g><\/g><\/svg>\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t
    \n

    Press work<\/h2>\t\t\t\t\t\t

    <\/p>\n\t\t\t\t\t\t<\/div>\n\n\t\t\t\t\t<\/li>\n\t\t\t\t\t\t\t<\/ul>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

    \n\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t

    Deliveries from tool design to final product<\/span><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

    \n\t\t\t\t
    \n\t\t\t\t\t

    ECCENTRIC PRESS LE 63 C<\/h4>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
    \n\t\t\t\t\t\t
    \n\t\t\t\t\t
    \n\t\t\t
    \n\t\t\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t
    • Nominal forming force of the press:<\/span><\/h5><\/li>
    • Dimensions of the table work surface:\u00a0\u00a0\u00a0<\/span><\/h5><\/li>
    • Number of strokes:\u00a0\u00a0<\/span><\/h5><\/li>
    • Stroke of the ram:<\/span><\/h5><\/li>
    • Rearrangement of the ram:<\/span><\/h5><\/li><\/ul>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
      \n\t\t\t
      \n\t\t\t\t\t\t
      \n\t\t\t\t
      \n\t\t\t\t\t\t\t\t\t
      63t<\/span><\/h5>
      800×630 mm
      <\/span><\/h5>
      64 \/min<\/span><\/h5>
      10-105 mm<\/span><\/h5>
      70mm<\/span><\/h5>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
      \n\t\t\t\t
      \n\t\t\t\t\t

      ECCENTRIC PRESS LEN 25 C<\/h4>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
      \n\t\t\t\t\t\t
      \n\t\t\t\t\t
      \n\t\t\t
      \n\t\t\t\t\t\t
      \n\t\t\t\t
      \n\t\t\t\t\t\t\t\t\t
      • Nominal pressing force:<\/span><\/h5><\/li>
      • Dimensions of the table work surface:\u00a0\u00a0\u00a0<\/span><\/h5><\/li>
      • Number of strokes:\u00a0\u00a0<\/span><\/h5><\/li>
      • Stroke of the ram:<\/span><\/h5><\/li>
      • Rearrangement of the ram:<\/span><\/h5><\/li><\/ul>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
        \n\t\t\t
        \n\t\t\t\t\t\t
        \n\t\t\t\t
        \n\t\t\t\t\t\t\t\t\t
        25t<\/span><\/h5>
        560 x 540 mm
        <\/span><\/h5>
        8-85 zdvih\/min<\/span><\/h5>
        8-85 mm<\/span><\/h5>
        55 mm<\/span><\/h5>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
        \n\t\t\t\t
        \n\t\t\t\t\t

        ECCENTRIC PRESS LE 160 C<\/h4>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
        \n\t\t\t\t\t\t
        \n\t\t\t\t\t
        \n\t\t\t
        \n\t\t\t\t\t\t
        \n\t\t\t\t
        \n\t\t\t\t\t\t\t\t\t
        • Nominal forming force of the press:<\/span><\/h5><\/li>
        • Dimensions of the table work surface:\u00a0\u00a0\u00a0<\/span><\/h5><\/li>
        • Clamping surface of the ram:<\/span><\/h5><\/li>
        • Number of strokes:\u00a0\u00a0<\/span><\/h5><\/li>
        • Stroke of the ram:<\/span><\/h5><\/li>
        • Rearrangement of the ram:<\/span><\/h5><\/li><\/ul>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
          \n\t\t\t
          \n\t\t\t\t\t\t
          \n\t\t\t\t
          \n\t\t\t\t\t\t\t\t\t
          160t<\/span><\/h5>\n
          1000 x 720 mm<\/span><\/h5>\n
          700 x 380 mm<\/span><\/h5>\n
          45 \/min<\/span><\/h5>\n
          20-120 mm<\/span><\/h5>\n
          100mm<\/span><\/h5>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
          \n\t\t\t\t
          \n\t\t\t\t\t

          Press \/ Hydraulic \/ PYE 250 SSM<\/h4>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
          \n\t\t\t\t\t\t
          \n\t\t\t\t\t
          \n\t\t\t
          \n\t\t\t\t\t\t
          \n\t\t\t\t
          \n\t\t\t\t\t\t\t\t\t
          • Nominal forming force of the press:<\/span><\/h5><\/li>
          • Dimensions of the table work surface:\u00a0\u00a0\u00a0<\/span><\/h5><\/li>
          • Max. ram stroke:\u00a0\u00a0<\/span><\/h5><\/li>
          • Unloading:<\/span><\/h5><\/li>
          • Approach speed:<\/span><\/h5><\/li><\/ul>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
            \n\t\t\t
            \n\t\t\t\t\t\t
            \n\t\t\t\t
            \n\t\t\t\t\t\t\t\t\t
            250t<\/span><\/h5>
            900 x 630 mm
            <\/span><\/h5>
            500 mm<\/span><\/h5>
            360 mm<\/span><\/h5>
            200 mm\/s<\/span><\/h5>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
            \n\t\t\t
            \n\t\t\t\t\t\t
            \n\t\t\t\t
            \n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"lis1.png\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
            \n\t\t\t\t
            \n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"lis-2.png\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
            \n\t\t\t\t\t\t
            \n\t\t\t\t\t
            \n\t\t\t
            \n\t\t\t\t\t\t
            \n\t\t\t\t
            \n\t\t\t\t\t\t\t
            \n\t\t\t
              \n\t\t\t
            • \n \n\t\t\t\t\t\t
              \n\t\t\t\t\t\t\t
              \n\n\t\t\t\t\t\t\t\t\n\n\t\t\t\t\t\t\t\t<\/path>\t\t\t<\/path>\t\t\t<\/path>\t\t\t<\/path>\t\t\t<\/path>\t\t\t<\/path>\t\t\t<\/path>\t\t\t<\/path>\t\t\t<\/path>\t\t\t<\/path>\t\t\t<\/path>\t\t\t<\/path>\t\t\t<\/path>\t\t\t<\/path>\t\t<\/g>\t<\/g><\/g><\/g><\/g><\/g><\/g><\/g><\/g><\/g><\/g><\/g><\/g><\/g><\/g><\/g><\/g><\/g><\/svg>\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t
              \n

              Forming the ends of profiles<\/h2>\t\t\t\t\t\t

              <\/p>\n\t\t\t\t\t\t<\/div>\n\n\t\t\t\t\t<\/li>\n\t\t\t\t\t\t\t<\/ul>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

              \n\t\t\t\t
              \n\t\t\t\t\t\t\t\t\t

              Amob MB tube end formers include all common taper variants,
              pipe end forming and other profiles. There is a choice of two, three and four station machines.<\/span><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

              \n\t\t\t\t
              \n\t\t\t\t\t

              NC Pipe End Forming Machine AMOB MB 60\/1 a MB60\/2<\/h4>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
              \n\t\t\t\t
              \n\t\t\t\t\t\t\t\t\t
              • this machine enables precise and high-quality forming of tube ends with serial repeatability.<\/span><\/h5><\/li>
              • machine for forming pipe ends, characterized by the ability to perform in 2-4 forming steps.<\/span><\/h5><\/li>
              • forming diameter (black steel) \u00d860 x 2,5 mm<\/span><\/h5><\/li>
              • Dimension of square profile (black steel) 60 x 60 x 2.5 mm<\/span><\/h5><\/li>
              • forming force 12 tons<\/span><\/h5><\/li><\/ul>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
                \n\t\t\t\t
                \n\t\t\t\t\t

                NC Pipe End Forming Machine AMOB MB 100\/3<\/h4>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
                \n\t\t\t\t
                \n\t\t\t\t\t\t\t\t\t
                • this machine enables precise and high-quality forming of tube ends with serial repeatability.<\/span><\/h5><\/li>
                • tube end forming machine, characterized by the ability to perform up to 3 forming steps.<\/span><\/h5><\/li>
                • forming diameter (black steel) \u00d860 x 4 mm<\/span><\/h5><\/li>
                • forming diameter (stainless steel) \u00d860 x 2,5mm<\/span><\/h5><\/li>
                • Dimension of square profile (black steel) 60 x 60 x 2.5 mm<\/span><\/h5><\/li>
                • forming force 12 tons<\/span><\/h5><\/li><\/ul>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
                  \n\t\t\t
                  \n\t\t\t\t\t\t
                  \n\t\t\t\t
                  \n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"formovac-1.png\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
                  \n\t\t\t\t
                  \n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"formovac-2.png\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
                  \n\t\t\t\t\t\t
                  \n\t\t\t\t\t
                  \n\t\t\t
                  \n\t\t\t\t\t\t
                  \n\t\t\t\t
                  \n\t\t\t\t\t\t\t
                  \n\t\t\t
                    \n\t\t\t
                  • \n \n\t\t\t\t\t\t
                    \n\t\t\t\t\t\t\t
                    \n\n\t\t\t\t\t\t\t\t\n\n\t\t\t\t\t<\/path>\t<\/g><\/g>\t\t\t<\/path>\t<\/g><\/g>\t\t\t<\/rect>\t<\/g><\/g>\t\t\t<\/path>\t<\/g><\/g>\t\t\t<\/path>\t<\/g><\/g>\t\t\t<\/polygon>\t<\/g><\/g><\/g><\/g><\/g><\/g><\/g><\/g><\/g><\/g><\/g><\/g><\/g><\/g><\/g><\/g><\/g><\/svg>\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t
                    \n

                    Resistance welding<\/h2>\t\t\t\t\t\t

                    <\/p>\n\t\t\t\t\t\t<\/div>\n\n\t\t\t\t\t<\/li>\n\t\t\t\t\t\t\t<\/ul>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

                    \n\t\t\t\t
                    \n\t\t\t\t\t

                    CDi 1502 inverter\/condenser power supply<\/h4>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
                    \n\t\t\t\t
                    \n\t\t\t\t\t\t\t\t\t
                    • CDi 1502 welding inventory\/condenser power supply 66mFa\/1600 Ws for arc welding of studs according to EN ISO 14555. Applicable for M3-M8 (M10) \u00d82-8 mm bolts (PT, UT, IT according to EN ISO 13918)<\/span><\/h5><\/li><\/ul>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
                      \n\t\t\t
                      \n\t\t\t\t\t\t
                      \n\t\t\t\t
                      \n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"svarecka.png\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
                      \n\t\t\t\t\t\t
                      \n\t\t\t\t\t
                      \n\t\t\t
                      \n\t\t\t\t\t\t
                      \n\t\t\t\t
                      \n\t\t\t\t\t\t\t
                      \n\t\t\t
                        \n\t\t\t
                      • \n \n\t\t\t\t\t\t
                        \n\t\t\t\t\t\t\t
                        \n\n\t\t\t\t\t\t\t\t\n\n\t\t\t\t\t\t\t\t<\/path>\t\t\t<\/path>\t\t\t<\/path>\t\t\t<\/path>\t\t\t<\/path>\t\t\t<\/path>\t\t\t<\/path>\t\t\t<\/path>\t\t\t<\/path>\t\t\t<\/path>\t\t\t<\/path>\t\t\t<\/path>\t\t\t<\/path>\t\t\t<\/path>\t\t<\/g>\t<\/g><\/g><\/g><\/g><\/g><\/g><\/g><\/g><\/g><\/g><\/g><\/g><\/g><\/g><\/g><\/g><\/g><\/svg>\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t
                        \n

                        Mechanical marking<\/h2>\t\t\t\t\t\t

                        <\/p>\n\t\t\t\t\t\t<\/div>\n\n\t\t\t\t\t<\/li>\n\t\t\t\t\t\t\t<\/ul>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

                        \n\t\t\t\t
                        \n\t\t\t\t\t\t\t\t\t
                        • Stamps and punches – reliable marking method, high flexibility and simplicity.<\/span><\/h5><\/li>
                        • Stamps and punches can be implemented in forming and cutting tools.<\/span><\/h5><\/li>
                        • They are made of premium steel, guaranteeing a high degree of quality.<\/span><\/h5><\/li>
                        • Hardness from 59-63 HRC<\/span><\/h5><\/li><\/ul>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
                          \n\t\t\t
                          \n\t\t\t\t\t\t
                          \n\t\t\t\t
                          \n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"razniky.png\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
                          \n\t\t\t\t\t\t
                          \n\t\t\t\t\t
                          \n\t\t\t
                          \n\t\t\t\t\t\t
                          \n\t\t\t\t
                          \n\t\t\t\t\t\t\t
                          \n\t\t\t
                            \n\t\t\t
                          • \n \n\t\t\t\t\t\t
                            \n\t\t\t\t\t\t\t
                            \n\n\t\t\t\t\t\t\t\t\n\n\t\t\t\t\t<\/path>\t<\/g><\/g>\t\t\t<\/path>\t<\/g><\/g>\t\t\t<\/rect>\t<\/g><\/g>\t\t\t<\/path>\t<\/g><\/g>\t\t\t<\/path>\t<\/g><\/g>\t\t\t<\/polygon>\t<\/g><\/g><\/g><\/g><\/g><\/g><\/g><\/g><\/g><\/g><\/g><\/g><\/g><\/g><\/g><\/g><\/g><\/svg>\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t
                            \n

                            Welding work<\/h2>\t\t\t\t\t\t

                            <\/p>\n\t\t\t\t\t\t<\/div>\n\n\t\t\t\t\t<\/li>\n\t\t\t\t\t\t\t<\/ul>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t

                            \n\t\t\t
                            \n\t\t\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
                            \n\t\t\t\t\t\t
                            \n\t\t\t\t\t
                            \n\t\t\t
                            \n\t\t\t\t\t\t
                            \n\t\t\t\t
                            \n\t\t\t\t\t\t\t
                            \n\t\t\t
                              \n\t\t\t
                            • \n \n\t\t\t\t\t\t
                              \n\t\t\t\t\t\t\t
                              \n\n\t\t\t\t\t\t\t\t\n\n\t\t\t\t\t<\/path>\t<\/g><\/g>\t\t\t<\/path>\t<\/g><\/g>\t\t\t<\/rect>\t<\/g><\/g>\t\t\t<\/path>\t<\/g><\/g>\t\t\t<\/path>\t<\/g><\/g>\t\t\t<\/polygon>\t<\/g><\/g><\/g><\/g><\/g><\/g><\/g><\/g><\/g><\/g><\/g><\/g><\/g><\/g><\/g><\/g><\/g><\/svg>\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t
                              \n

                              Cutting, bending and dividing materials<\/h2>\t\t\t\t\t\t

                              <\/p>\n\t\t\t\t\t\t<\/div>\n\n\t\t\t\t\t<\/li>\n\t\t\t\t\t\t\t<\/ul>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t

                              \n\t\t\t
                              \n\t\t\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t<\/div>\n\t\t","protected":false},"excerpt":{"rendered":"

                              Services Press work Deliveries from tool design to final product ECCENTRIC PRESS LE 63 C Nominal forming force of the press: Dimensions of the table work surface:\u00a0\u00a0\u00a0 Number of strokes:\u00a0\u00a0 Stroke of the ram: Rearrangement of the ram: 63t 800×630 mm 64 \/min 10-105 mm 70mm ECCENTRIC PRESS LEN 25 C Nominal pressing force: Dimensions […]<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"elementor_header_footer","meta":{"footnotes":""},"class_list":["post-52","page","type-page","status-publish","hentry"],"_links":{"self":[{"href":"https:\/\/valcverk.cz\/en\/wp-json\/wp\/v2\/pages\/52","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/valcverk.cz\/en\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/valcverk.cz\/en\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/valcverk.cz\/en\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/valcverk.cz\/en\/wp-json\/wp\/v2\/comments?post=52"}],"version-history":[{"count":17,"href":"https:\/\/valcverk.cz\/en\/wp-json\/wp\/v2\/pages\/52\/revisions"}],"predecessor-version":[{"id":1256,"href":"https:\/\/valcverk.cz\/en\/wp-json\/wp\/v2\/pages\/52\/revisions\/1256"}],"wp:attachment":[{"href":"https:\/\/valcverk.cz\/en\/wp-json\/wp\/v2\/media?parent=52"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}